SM95 Screw Jack Controller
Specifications
|
Size:
|
68mm x 58mm x 20mm
|
|
Construction:
|
Boxed.
|
|
Connections:
|
Via screw block connectors & fly lead to RX.
|
|
Supply Voltage:
|
4.4v to 7.0v DC.
|
|
Supply Current:
|
5mA standby 70mA operating.
|
|
Switching Voltage.
|
30v DC Max
|
|
Switching Current.
|
5 Amp Max
|
Description
The controller is a micro processor operated unit designed to simplify the use
of motor driven retract and flap control systems. The signal from the receiver
is used to decide where the retract should be. The micro processor then checks
to see if the retract is in the required position, if it is not then power of
the correct polarity is then supplied to the motor until the limit micro switch
operates, power is then removed until the next operating sequence is demanded.
Standard Receiver Wiring Connections
|
Lead Function
|
Futaba
|
JR/Sanwa(new)
|
Hitec
|
Sanwa Old Style(Moulding Numbers)
|
|
+= Positive
|
Red
|
Red
|
Red
|
3
|
|
- = Negative
|
Black
|
Brown
|
Black
|
2
|
|
IP = Signal
|
White
|
Orange
|
Yellow
|
1
|
WARNING
1. Do not reverse positive and negative leads. (Red and Black).
2. Always remove power from the module before connecting or disconnecting any
input or output connection, failure to observe these instructions can destroy
the module.
3. Always range check when adding or changing the control system of a model.
4. This module has been tested for use on UK 35 MHz aircraft frequency, use on
other frequencies is at the users risk.
YOUR GUARANTEE
S.M. Services (UK) Ltd guarantee all products for 1 year from date of purchase.
During this time S.M. Services (UK) Ltd will repair or replace all defective
products free of charge, except for units subject to fair wear and tear, or
units that are subject to crash damage. To qualify for benefits under the
guarantee you must have installed and used the product in accordance with S.M.
Services (UK) Ltd instructions. Consequential losses and accidental damage to
the product are not covered by the guarantee. S.M. Services (UK) Ltd cannot be
responsible for results of using our products for any purposes other than those
described in the relevant instructions.
RETURNS
Any returned products ordered in error or are not required will if returned
unopened in original product packaging within 28 days from date of purchase be
subject to a full refund less shipping charges and a 5% handling charge. All
other returns will be subject to a full refund less shipping charges and a 20%
handling charge.
S.M.Services (UK) Ltd
18 Orchard Way, Cranfield, Beds. MK43 0HU.
Tel.01234 751095