S.M.Services (UK) Ltd
SMSM39 Multi Scanner Pegboard
Specifications
|
Size.
|
460mm x 340mm x 170mm.
|
|
Construction.
|
Boxed.
|
|
Power Connections.
|
2.5mm Jack connector Tip Positive. (centre Contact).
|
|
Scanner Connection.
|
Case mounted 5 Pin Din socket.
|
|
External Supply.
|
Voltage.7.2 to 15v DC.
|
|
Supply Current.
|
500mA Max. (all channels operating) Average 100mA (six active channels).
|
|
Temperature Range.
|
5 to 35 Degrees Centigrade. (operating).
|
|
Display.
|
All Led. Channels 55 to 90.
|
Description
The Multi Scanner Peg Board has been designed and manufactured using the very latest state of the art electronics as an add on unit to allow clubs and individuals to monitor activity on the 35MHz aircraft band. It repeats the led outputs from the Multi Scanner behind a perspex peg board to allow easy identification of the channels in use.
The unit is housed in an instrument type case with space to house the Multi Scanner, speaker and external battery.
Installation. (if scanner Din connector is not fitted). Otherwise go to step 5.
1. Remove existing Multi Scanner top cover.
2. Locate 3 pin connector on the main pcb directly behind channel 69.
3. Fit top cover fly lead to the 3 pin connector the black wire nearest to the heat sink.
4. Re fit top cover.
5. Make up lead for Peg Board power supply from external battery.
6. Connect scanner and peg board to external power, plug in peg board fly lead to scanner and switch on.
7. Check operation.
Warning.
For safety reasons it is recommended that an inline fuse is fitted to the supply lead from the external battery, a fuse rating of 1 amp is adequate.
If you have any questions, problems or suggestions with this unit please contact us, we will be glad to help and advise you
.
YOUR GUARANTEE
S.M. Services (UK) Ltd guarantee all products for 1 year from date of purchase. During this time S.M. Services (UK) Ltd will repair or replace all defective products free of charge, except for units subject to fair wear and tear, or units that are subject to crash damage. To qualify for benefits under the guarantee you must have installed and used the product in accordance with S.M. Services (UK) Ltd instructions. Consequential losses and accidental damage to the product are not covered by the guarantee. S.M. Services (UK) Ltd cannot be responsible for results of using our products for any purposes other than those described in the relevant instructions.
RETURNS
Any returned products ordered in error or are not required will if returned unopened in original product packaging within 28 days from date of purchase be subject to a full refund less shipping charges and a 5% handling charge. All other returns will be subject to a full refund less shipping charges and a 20% handling charge.
S.M.Services (UK) Ltd
18 Orchard Way, Cranfield, Beds. MK43 0HU.
Tel.01234 751095